F.B.R. Burner

is founded, an artisan company for the construction and sale of burners of small powers for civil use and small industrial burners and for melting furnaces suitable for light alloys of aluminium, bronze and brass. F.B.R. Burner began its Research and Development activity in 1975. From that year the study and design activities precede the production of all the products placed on the market. The consolidation of commercial relationships and collaboration with important international markets leads to a doubling of production spaces and an increase in the organizational chart. The entry of new industrial partners gives renewed impetus to research and allows the introduction of new technological production systems. In 2000 F.B.R. expands its production and storage site through the acquisition of spaces adjacent to the main historic headquarters and further areas in Verona. Today the range of F.B.R. burners meet the most specific needs of civil and industrial heating, thanks to the custom design and constant research.

LIGHT OIL BURNER

G 1S

G 0

G  X3S

G X4S

G 2F MAXI

*SERIE G & SERIE G/F
MODEL:-
G 0HR – G 0SR – G 0H – G 0S – G 1HR – G 1H – G 1S – G 2H MAXI – G 2S MAXI
G X3H -G X3S – G X4H – G X4S – G X5H – G X5S
G 1F – G 2F MAXI – G X3F – G X4F – G X5F (BAKERY OVENS)
Min kW 23.7 Max kW 356


DETAILED SPECIFICATION: 
• Aluminium frame
• Combustion head with micro adjustment at high efficiency and high flame stability
• Protection cover with noise reduction plate
• Flange and insulating gasket for fixing at boiler
• Single-phase power supply
• Photo resistance for flame detection
• IP 40 electric protection level.

G X4/2 – G X5/2

*SERIE GX
MODEL: G X4/2 – G X5/2
Min kW 95 Max kW 415
 

DETAILED SPECIFICATION: 
• Aluminium frame
• Combustion head with micro adjustment at high efficiency and high flame stability
• Protection cover with noise reduction plate
• Flange and insulating gasket for fixing at boiler
• Single-phase power supply
• Photo resistance for flame detection
• IP 40 electric protection level
• Hydraulic system of regulation combustive air on the two stages of flame.

FGP 50/2

FGP 150/2

*SERIE FGP
MODEL: FGP 50/2 EVO-FGP 70/2-FGP 100/2-FGP 100/2 EVO-FGP 120/2-FGP 150/2
Min kW 117/237 Max kW 1744
 

DETAILED SPECIFICATION: 
• Fan at high pressurisation
• Combustion head with adjustment at high performance and elevated flame stability
• Flange and insulating gasket for fixing at boiler
• Three-phase power supply
• Photo resistance for flame detection IP 40 electric protection level
• Supports and tie rods for burner extraction FGP 70/2 – FGP 100/2 – FGP 120/2 – FGP 150/2
• Easy extraction of combustion head without get off the burners by boiler.

*SIRIE FGP
MODEL: FGP 190/3-FGP 250/3-FGP 350/3-FGP 450/3
Min kW 255/712 Max kW 5337


DETAILED SPECIFICATION: 
• Fan at high pressurisation
• Combustion head with adjustment at high performance and elevated flame stability
• Flange and insulating gasket for fixing at boiler
• Three-phase power supply
• Photo resistance for flame detection
• IP 40 electric protection level
• Easy extraction of combustion head without get off the burners by boiler
• Timer for the activation of the three stage valve: factory setting = 18sec
• Dedicated motor for the activation of the light-oil pump.

 
 


*Available version with MECHANICAL CAM (MEC) or ELECTRONIC CAM (EL)
MODEL: FGP 50/M EVO-FGP 70/M-FGP 100/M-FGP 120/M-FGP 150/M-FGP 190/M (MEC OR EL)-FGP 250/M (MEC OR EL)-FGP 350/M (MEC OR EL)-FGP 450/M (MEC OR EL)-FGP 550/M (MEC OR EL)-
FGP 650/M (MEC & EL) -FGP 750/M (MEC & EL)-FGP 1000/M (MEC & EL)-FGP 1300/M (MEC & EL)-FGP 1500/M (MEC & EL)-FGP 1800/M (MEC & EL)
-Min kW 124/237- Max kW 17442


DETAILED SPECIFICATION: 
• Frame made of steel
• Centrifugal fan at high pressurization with reverse curved blades at low noisiness
• Combustion head with adjustment at high performance and elevated flame stability equipped with inox steel blast tube and steel flame disc
• Easy extraction of combustion head without get off the burners by boiler
• Flange and insulating gasket for fixing at boiler/furnace
• Electronic control box for control and supervision of burner
• UV scanner for flame detection
• Three-phase power supply
• IP40 electric protection level
• Safety air pressure switch to stop the burner in case of failed or anomalous fan operation
• One servomotor for air shutter
• One servomotor for the fuel pressure regulator
• Mobile shutter with total closure when idle for minimize the energetic losses related at boiler cooling
• Light-oil gear pump operated by specific electric motor
• Nozzle assembly with magnet to control inlet/return needle nozzle
• Maximum light-oil pressure switch to stop the burner in case of the light-oil pressure on the return is higher then the set point value
• LCD display with interactive configuration
• Dry contacts for remote signals: burner on, burner in lock-out
• Set up for the additional specific kit that transforms burner operation as modulating i.e. The modulating kit allows to supply any power between the minimum and maximum value based on instantaneous loading request.

address

No. 6, Jalan Serendah 26/39,
Hicom Industrial Estate,
40400 Shah Alam,
Selangor, Malaysia

operation hours

Monday – Friday 

×
img

Error: Contact form not found.

Contact Info

Phone number

(456) 789 10 12

(456) 789 10 15

Address info

1363-1385 Sunset Blvd Los Angeles