F.B.R
- Home
- F.B.R

F.B.R. Burner
is founded, an artisan company for the construction and sale of burners of small powers for civil use and small industrial burners and for melting furnaces suitable for light alloys of aluminium, bronze and brass. F.B.R. Burner began its Research and Development activity in 1975. From that year the study and design activities precede the production of all the products placed on the market. The consolidation of commercial relationships and collaboration with important international markets leads to a doubling of production spaces and an increase in the organizational chart. The entry of new industrial partners gives renewed impetus to research and allows the introduction of new technological production systems. In 2000 F.B.R. expands its production and storage site through the acquisition of spaces adjacent to the main historic headquarters and further areas in Verona. Today the range of F.B.R. burners meet the most specific needs of civil and industrial heating, thanks to the custom design and constant research.- F.B.R
- Dual Fuel Burner
- Gas Burner
- Heavy Oil Burner
- Light Oil Burner
- Fulton
- Steam & Hot Water Boiler
- Thermal Oil Heater
- Madas
- Gas Regulator
- Gas Filter
- Other Products
- Other Products
GAS BURNER
GAS X0
GAS X5
GAS X3CE-F
GAS XP60 EVO
*SIRIE X
MODEL: GAS X0-GAS X1-GAS X2-GAS X3-GAS X4-GAS X5
Min kW 11.6 Max kW 349
*SIRIE X/F
(FOR BAKERY OVENS)
MODEL:GAS X1 CE F-GAS X2 CE F-GAS X3 CE F-GAS X4 CE F-GAS X5 CE F
Min kW 23.2 Max kW 349
*SIRIE XP
MODEL:GAS XP 60 EVO
Min kW 232 Max kW 630
DETAILED SPECIFICATION:
• Die-cast aluminum body
• Fan at high pressurisation
• Combustion head with adjustment at high performance and elevated flame stability equipped with inox steel blast tube and steel flame disc
• Protection cover with noise reduction plate
• Flange and insulating gasket for fixing at boiler
• Single-phase power supply GAS X1 CE F-GAS X2 CE F-GAS X3 CE F-GAS X4 CE F-GAS X5 CE F)
• Three-phase power supply (GAS XP60 EVO)
• Safety air pressure switch to stop the burner in case of failed or anomalous fan operation
• Gas train with safety valve and adjustment valve
• Ionization probe for flame detection
• IP 40 electric protection level.
GAS X 1/2 CE-GAS X 2/2 CE-GAS X 3/2 CE
GAS XP60/2 EVO
*SIRIE X
MODEL:GAS X 1/2 CE-GAS X 2/2 CE-GAS X 3/2 CE-GAS X 4/2 CE-GAS X5/2 CE
Min kW 18/23.2 Max kW 349
*SIRIE XP
MODEL:GAS XP60/2 EVO
Min kW 116/232 Max kW 630
DETAILED SPECIFICATION:
• Aluminum body
• Fan at high pressurisation
• Combustion head with adjustment at high performance and elevated flame stability equipped with inox steel blast tube and steel flame disc
• Protection cover with noise reduction plate
• Flange and insulating gasket for fixing at boiler
• Single-phase power supply (GAS X 1/2 CE-GAS X 2/2 CE-GAS X 3/2 CE-GAS X 4/2 CE-GAS X5/2 CE)
• Three-phase power supply GAS XP60/2 EVO)
• Safety air pressure switch to stop the burner in lock-out in case of failed or anomalous fan operation
• Gas train with: one block valve A class (1st stage + 2nd stage slow opening + safety) gas pressure switch – filter stabilizer
• Optional valve proving system
• Ionization probe for flame detection
• IP 40 electric protection level
• Servomotor for air shutter and for the consent of the 2nd stage gas valve
• Moving shutter with total closure when idle in order to reduce at the least energy losses related to boiler cooling down.
P70/2
*SIRIE P
MODEL:GAS P 70/2-GAS P 100/2-GAS P 150/2-GAS P 190/2-GAS P 250/2
Min kW 135/407 Max kW 2900
DETAILED SPECIFICATION:
• Die-cast aluminum body
• Fan at high pressurisation
• Combustion head with adjustment at high performance and elevated flame stability equipped with inox steel blast tube and steel flame disc
• Flange and insulating gasket for fixing at boiler
• Three-phase power supply
• Safety air pressure switch to stop the burner in lock-out in case of failed or anomalous fan operation
• Ionization probe for flame detection
• IP 40 electric protection level
• Servomotor for air shutter and for the consent of the 2nd stage gas valve
• Moving shutter with total closure when idle in order to reduce at the least energy losses related to boiler cooling down
• Supports and tie rods for burner extraction
• Easy extraction of combustion head without get off the burners by boiler.
GAS X5/M
GAS P250/M
GAS P150/M
GAS P1800/M
GAS XP60/M EVO
*SERIE X
MODEL:GAS X2/M-GAS X3/M-GAS X4/M-GAS X5/M EL
Min kW 17.4/40.7 Max kW 349
*SERIE XP
MODEL:GAS XP 40/M-GAS XP60/M EVO
Min kW 64/151 Max kW 630
*SERIE P/M
* Available version with MECHANICAL CAM (MEC) or ELECTRONIC CAM (EL)
MODEL:GAS P70/M-GAS P100/M-GAS P150/M-GAS P190/M (MEC OR EL)-GAS P250/M (MEC OR EL)-GAS P300/M (MEC OR EL)-GAS P350/M (MEC OR EL)-GAS P350 EVO EL-GAS P450/M (MEC OR EL)-GAS P450 EVO EL-GAS P550/M (MEC OR EL)-GAS P550 EVO EL-GAS P650/M (MEC OR EL)-GAS P750/M (MEC & EL)-GAS P1000/M (MEC & EL)-GAS P1300/M (MEC & EL)-GAS P1500/M (MEC & EL)-GAS P1800/M (MEC & EL)
Min kW 135/407 Max kW 17442
DETAILED SPECIFICATION:
• Burner frame made of steel completed by specific boiler plate
• Combustion head with adjustment at high efficiency and high flame stability equipped with blast tube made of stain steel and flame stability disk made of steel
• Safety air pressure switch -air side- that stops the burner in case of failed or irregular fan operation
• Spherical gas valve servo-controlled; progressive start and free way passage with total opening
• One servomotor for air flaps and one servomotor for spherical gas valve
• Moving shutter with total closure when idle in order to reduce at the least energy losses related to boiler cooling down
• High performance centrifugal fan with backward curved blades for low noise
• Gas train completely assembled and tested; complete of:
– Working valve class A
– Safety valve class A
– Minimum gas pressure switch
– Gas valve proving pressure switch
– Filter
• Valve proving system
• Three-phase power supply
• UV probe for flame detection
• Maximum gas pressure switch to stop the burner in lock-out in case of the gas pressure is higher then the set point value
• Pilot ignition
• Set up for the additional specific kit that transforms burner operation as modulating i.e. the modulating kit allows to supply any power between the minimum and the maximum value based on instantaneous loading request.
quick links
need help?
address
No. 6, Jalan Serendah 26/39,
Hicom Industrial Estate,
40400 Shah Alam,
Selangor, Malaysia
operation hours
Monday – Friday