F.B.R
- Home
- F.B.R

F.B.R. Burner
is founded, an artisan company for the construction and sale of burners of small powers for civil use and small industrial burners and for melting furnaces suitable for light alloys of aluminium, bronze and brass. F.B.R. Burner began its Research and Development activity in 1975. From that year the study and design activities precede the production of all the products placed on the market. The consolidation of commercial relationships and collaboration with important international markets leads to a doubling of production spaces and an increase in the organizational chart. The entry of new industrial partners gives renewed impetus to research and allows the introduction of new technological production systems. In 2000 F.B.R. expands its production and storage site through the acquisition of spaces adjacent to the main historic headquarters and further areas in Verona. Today the range of F.B.R. burners meet the most specific needs of civil and industrial heating, thanks to the custom design and constant research.- F.B.R
- Dual Fuel Burner
- Gas Burner
- Heavy Oil Burner
- Light Oil Burner
- Fulton
- Steam & Hot Water Boiler
- Thermal Oil Heater
- Madas
- Gas Regulator
- Gas Filter
- Other Products
- Other Products
GAS/LIGHT OIL

*SERIE GMX
MODEL:GM X0-GM X1-GM X3-GM X4
Min kW 22.6 Max kW 232
DETAILED SPECIFICATION:
• Aluminium frame
• Fan at high pressurisation
• Combustion head with adjustment at high performance and elevated flame stability equipped with blast tube and flame disc
• Flange and insulating gasket for fixing at boiler
• Single-phase power supply
• Manual switch for the fuel selection gas/light-oil
• Safety air pressure switch to stop the burner in lock-out in case of failed or anomalous fan operation
• Models GM X0 – GM X1 with gas train with one-block valve class B
• Models GM X3 – GM X4 with gas train with safety valve class A, adjustment 1st stage valve class A
• UV probe for flame detection
• IP 40 electric protection level.
K 4/2
*SERIE K
MODEL:K 3/2-K 4/2 EVO-K 5/2-K 6/2-K 7/2
Min kW 63.9/116 Max kW 1744
DETAILED SPECIFICATION:
• Aluminium frame;
• Fan at high pressurisation
• Combustion head with adjustment at high performance and elevated flame stability equipped with blast tube and flame disc
• Flange and insulating gasket for fixing at boiler
• Single-phase power supply K 3/2
• Three-phase power supply
• Manual switch for the fuel selection gas/light-oil
• Safety air pressure switch to stop the burner in lock-out in case of failed or anomalous fan operation
• Equipped with gas train with one-block valve class A (1st stage + 2nd stage slow opening + safety)
• Gas valve proving system VPS as standard for model K 7/2, optional for models K 5/2 – K 6/2
• Motor dedicated for the light-oil pump; it turns on simultaneously to the ignition transformer activation
• Maximum gas pressure switch as standard for models K 6/2 – K 7/2, optional for model K 5/2
• UV probe for flame detection
• Supports and tie rods for burner extraction
• Easy extraction of combustion head without get off the burners by boiler
• Servomotor for air shutter and for the consent of the 2nd stage operation
• Moving shutter with total closure when idle in order to reduce at the least energy losses related to boiler cooling down
• IP 40 electric protection level.
K750/M
K250/M
*SERIE K
* Available version with MECHANICAL CAM (MEC) or ELECTRONIC CAM (EL)
MODEL:K 6/M-K 7/M-K 190/M (MEC OR EL)-K 250/M (MEC OR EL)-K 350/M (MEC OR EL)-K 450/M (MEC OR EL)-K 550/M (MEC OR EL)-K 650/M (MEC OR EL)-K 750/M (MEC & EL)-K 1000/M (MEC & EL)-K 1300/M (MEC & EL)-K 1500/M (MEC & EL)-K 1800/M (MEC & EL)
Min kW 200/581 Max kW 17442
DETAILED SPECIFICATION:
• Burner made of steel completed by specific boiler plate;
• Centrifugal fan at high pressurization with reverse curved blades at low noisiness;
• Combustion head with adjustment at high performance and elevated flame stability equipped with steel blast tube and steel flame disc;
• Easy extraction of combustion head without get off the burners by boiler;
• Combustible-air adjustment for optimal combustion value;
• Flange and insulating gasket for fixing at boiler;
• Electronic control system for controlling and command the burner
• UV Photocell for flame detection;
• Gas/light oil selector;
• Three-phase power supply;
• IP40 electric protection level;
• Safety air pressure switch to stop the burner in case of failed or anomalous fan operation;
• Spherical gas servocontrolled valve: progressive start and freeway passage with total opening;
• Servomotor for air shutter, for the spherical gas valve and for the light-oil pressure regulator;
• Mobile shutter with total closure when idle for minimize the energetic losses related at boiler cooling;
• Gas train with A class safety valve and A class adjustment valve;
• Leakage integrate in Lamtec BT340 system;
• Light-oil pressure regulator servo-controlled;
• Light oil gear pump operated by specific electric motor;
• Maximum gas pressure switch to stop the burner in lock-out in case of the gas pressure is higher then the set point value;
• Maximum light-oil pressure switch to stop the burner in case of the light-oil pressure on the return is higher then the set point; • Pilot ignition (only for GAS fuel);
• Set up for the additional specific kit that transforms burner operation as modulating i.e. The modulating kit allows to supply any power between the minimum and maximum value based on instantaneous loading request.
GAS/HEAVY OIL
KN 450/M
*SERIE KN
* Available version with MECHANICAL CAM (MEC) or ELECTRONIC CAM (EL)
MODEL:KN 190/M (EL OR MEC)-KN 250/M (EL OR MEC)-KN 350/M (EL OR MEC)-KN 450/M (EL OR MEC)-KN 550/M (EL OR MEC)-KN 650/M (EL OR MEC)-KN 750/M (EL & MEC)-KN 1000/M (EL & MEC)-KN 1300/M (EL & MEC)-KN 1500/M (MEC & EL)-KN 1800/M (MEC & EL)
Min kW 349/1046 Max kW 17442
DETAILED SPECIFICATION:
• Burner frame made of steel completed by specific boiler plate;
• Centrifugal fan at high pressurization with reverse curved blades at low noisiness;
• Combustion head with adjustment at high performance and elevated flame stability equipped with inox steel blast tube and steel flame disc;
• Easy extraction of combustion head without get off the burners by bolier;
• Flange and insulating gasket for fixing at boiler;
• Minimum and maximum thermostat;
• Control box for control and supervision of burner;
• UV Photocell for flame detection;
• Gas/heavy oil selector;
• Three-phase power supply;
• IP44 electric protection level;
• Safety air pressure switch to stop the burner in case of failed or anomalous fan operation;
• Servomotor for air shutter, spherical gas valve and heavy oil pressure regulator;
• Mobile shutter with total closure when idle for minimize the energetic losses related at boiler cooling;
• Gas train with A class safety valve and A class adjustment valve;
• Leakage control with SIEMENS LDU11… valve proving system;
• Heavy oil gear pump operated by specific electric motor;
• Multistage pre-heating tank with specific flanged heaters at low density (anticracking and antigas);
• Pressure manometer on inlet pump;
• Thermometer inside pre-heating tank for temperature heavy-oil;
• Nozzle assembly with magnet to control inlet/return needle nozzle;
• Double filter between pump and nozzle;
• Set up for the additional specific kit that transforms burner operation as modulating i.e.the modulating kit allows to supply any power between the minimum and maximum value based on instantaneous loading request.
quick links
need help?
address
No. 6, Jalan Serendah 26/39,
Hicom Industrial Estate,
40400 Shah Alam,
Selangor, Malaysia
operation hours
Monday – Friday